Boilers
Heat Pumps
Cylinders
Heating Controls
Flues and Accessories
Commercial Solutions
Combi Boilers
Electric Boilers
Heat Only Boilers
System Boilers
Boilers
Heat Pump Training
Commercial Training
Product Training
Contact your ASM
Training
Courses are delivered in a relaxed and friendly atmosphere and our trainers, all former heating engineers, are qualified to the latest regulations and standards in gas, heat pumps, unvented water systems and solar.
To book your place, view the courses online below. You must be Gas Safe registered to be eligible to book a course.
Specialist Training
The BPEC Low Temperature Hot Water Heating Systems is a recommended pre-requisite qualification to allow progression onto the BPEC Level 3 Award in Air Source Heat Pump Systems.
Duration: 3 days
Cost: Introductory offer-£200
Accredited: Yes
Specialist Training
The course is for heating professionals looking to install Baxi ASHPs. This course will deliver the skills to design, install and commission our air source heat pump range and become a Baxi Heat Pump Installer.
Specialist Training
This course is designed to give a greater understanding of central heating control systems, specifically the installation practice and fault diagnosis for S and Y plan systems.
Specialist Training
Accredited by CIPHE, this popular course includes How a combi works; Multimeter training; and Boiler diagnostics. It is designed to give installers and heating engineers confidence to diagnose and repair boilers more easily.
Specialist Training
Delegates will be sent a home study pack that needs to be completed prior to attending the course. During the hands-on session you will learn the principles of design, installation, commissioning and servicing Air Source Heat Pump (ASHP) systems. This is followed by a formal assessment.
Specialist Training
Gain the practical skills required to install regulation-compliant condensing boilers and low/zero-carbon technology.
Specialist Training
The course is for anyone requiring an understanding of water regulations and water by-laws, in particular those wishing to become approved plumbers or contractors.
Specialist Training
During the hands-on session you will learn how to install, commission and service unvented hot water systems. This is followed by a formal assessment.
Specialist Training
The G3 re-assessment training course will give delegates refresher training covering the installation, commissioning and servicing of unvented hot water systems, as well as water regulations and other statutory requirements.
Specialist Training
Product specific course to gain practical knowledge of the Range Powermax and Potterton Powermax HE gas boilers. Learn about boiler components, operation sequence, flue requirements and fault finding.
Specialist Training
This course provides an entry level qualification for the Microgeneration Certification Scheme (MCS). Learn about the most common solar hot water systems installed in the UK, associated legislation, risk assessments and working at height requirements.
Specialist Training
Boiler Training
Accredited by CIPHE, this popular course includes How a combi works; Multimeter training; and Boiler diagnostics. It is designed to give installers and heating engineers confidence to diagnose and repair boilers more easily.
Specialist Training
Boiler Training
This course is designed to give a greater understanding of central heating control systems, specifically the installation practice and fault diagnosis for S and Y plan systems.
Specialist Training
Boiler Training
Product specific course to gain practical knowledge of the Range Powermax and Potterton Powermax HE gas boilers. Learn about boiler components, operation sequence, flue requirements and fault finding.
Specialist Training
Heat Pump Training
The course is for heating professionals looking to install Baxi ASHPs. This course will deliver the skills to design, install and commission our air source heat pump range and become a Baxi Heat Pump Installer.
Specialist Training
Heat Pump Training
Delegates will be sent a home study pack that needs to be completed prior to attending the course. During the hands-on session you will learn the principles of design, installation, commissioning and servicing Air Source Heat Pump (ASHP) systems. This is followed by a formal assessment.
Specialist Training
Heat Pump Training
The BPEC Low Temperature Hot Water Heating Systems is a recommended pre-requisite qualification to allow progression onto the BPEC Level 3 Award in Air Source Heat Pump Systems.
Specialist Training
Non Accredited
Accredited by CIPHE, this popular course includes How a combi works; Multimeter training; and Boiler diagnostics. It is designed to give installers and heating engineers confidence to diagnose and repair boilers more easily.
Specialist Training
Non Accredited
The course is for heating professionals looking to install Baxi ASHPs. This course will deliver the skills to design, install and commission our air source heat pump range and become a Baxi Heat Pump Installer.
Specialist Training
Non Accredited
Product specific course to gain practical knowledge of the Range Powermax and Potterton Powermax HE gas boilers. Learn about boiler components, operation sequence, flue requirements and fault finding.
Specialist Training
Non Accredited
This course is designed to give a greater understanding of central heating control systems, specifically the installation practice and fault diagnosis for S and Y plan systems.
Specialist Training
Accredited
Delegates will be sent a home study pack that needs to be completed prior to attending the course. During the hands-on session you will learn the principles of design, installation, commissioning and servicing Air Source Heat Pump (ASHP) systems. This is followed by a formal assessment.
Specialist Training
Accredited
The BPEC Low Temperature Hot Water Heating Systems is a recommended pre-requisite qualification to allow progression onto the BPEC Level 3 Award in Air Source Heat Pump Systems.
Specialist Training
Accredited
During the hands-on session you will learn how to install, commission and service unvented hot water systems. This is followed by a formal assessment.
Specialist Training
Accredited
The G3 re-assessment training course will give delegates refresher training covering the installation, commissioning and servicing of unvented hot water systems, as well as water regulations and other statutory requirements.
Specialist Training
Accredited
The course is for anyone requiring an understanding of water regulations and water by-laws, in particular those wishing to become approved plumbers or contractors.
Specialist Training
Accredited
Gain the practical skills required to install regulation-compliant condensing boilers and low/zero-carbon technology.
The course has been really worthwhile, with less theory and more actual learning. The trainer is very good - he actually set up the boilers to have faults that we had to find. I'm not a Baxi installer, but would definitely consider them after this course!
Sukhi Sidhu
Gas Flow Services Birmingham
Our product training course provides practical training on our air source heat pump range.
Our product training courses offer practical training on our latest products.
Baxi Works has everything you need in one place. It's the go-to for any busy installer, full of resources, benefits and rewards to thank you for being a loyal partner.
