Installed with an unvented cylinder on a fully pumped sealed system, it is perfect for larger properties with several bathrooms or those with a high demand for hot water.
*Terms and Conditions apply.
Baxi 600 System LPG | 24 System LPG | |
Sales Code | Boiler only |
7716065 |
Controls and accessories |
||
Concealed user controls | No | |
Operating mode selector switch with reset | Yes | |
User adjustable DHW temperature | Range - 35°C to 60°C | Yes |
User adjustable CH temperature | Range - 25°C to 80°C | Yes |
Temp/status/fault diagnosis display | LCD display | |
Wired outdoor weather sensor & relay kit (7683087) | Optional | |
Baxi wired room thermostat (720971601) | Optional | |
Baxi twin channel wired programmer (7212443) | Optional | |
Multifit rear pipework kit (7682790) | Optional | |
Pre-plumb jig (7682545) | Optional | |
ErP Product Information | ||
Seasonal Space Heating Energy Efficiency | % | 93 |
NOx | mg/kWh | 28.0 |
Sound Power Level, Indoors | LWA dB | 51 |
Space Heating Efficiency Class | A | |
Heat Input CH | kW (Max) gross (QnHs) | 27.4 |
kW (Min) gross (QnHs) | 5.2 | |
Heat Output CH (non condensing) factory setting | kW (Max) (Pn) | 24 |
kW (Min) (Pn) | 4.5 | |
Heat Output CH (condensing) factory setting | kW (Max) (Pnc) | 25.8 |
kW (Min) (Pnc) | 4.9 | |
Gas | ||
Gas supply connection | (mm) | 22 |
Inlet supply pressure (LPG) | mbar (nominal) | 37 |
Maximum Gas Rate | m3/hr | 4.95 |
SAP 2009 annual efficiency (PCDB/SEDBUK) | % | 89 |
NOx class | 6 | |
Mechanical and hydraulic | ||
Heat input central heating (CH) | kW max gross (QnwHs) | 27.4 |
Safety discharge pressure | bar | 3 |
Compartment ventilation required | No | |
Flow / return pipe size | (mm) | 22 |
Temporary filling loop supplied | No | |
Integral expansion vessel | Size (litres) | 7 |
CH system inhibitor required | Yes | |
Condensate discharge pipe size | (mm) | 21.5 |
Electrical | ||
Electrical supply | Volts / Hz | 230V/50Hz |
Permanent live required | Yes | |
Electrical cable required | core | 3 x 0.75 |
Power consumption when firing | Watts | 100 |
External fuse rating | Amps | 3 |
Internal fuse rating - connection board | Amps | 2HA250V |
Internal fuse rating - Main PCB board | Amps | 1.6 |
Boiler IP rating (electrical protection) without integral timer fitted | Approval Category | IPX5D |
Circulating pump exercise feature | Yes | |
Pump overrun | Yes | |
Integral 'boiler only' frost thermostat | Yes | |
Concentric flue system | ||
Standard telescopic concentric flue | Length in mm | 315-500 |
Horizontal and Vertical concentric (60/100 mm) | Max equivalent length (m) | 10 |
Reduction per 135° bend (m) | 0.5 | |
Reduction per 93° bend (m) | 1 | |
Horizontal and Vertical concentric (80/125mm) | Max equivalent length (m) | 20 |
Weights | ||
Installer lift weight (boiler) | Max (kg) | 28.1 |
Gross packaged boiler weight | (kg) | 30.6 |
We offer product training at our training centres across the UK for installers who want to get hands-on with Baxi boilers.
From construction and installation to functions and features, our expert trainers will give you a complete understanding of working with Baxi boilers.
Find a Baxi installer near you for a free quote to install your new boiler.